F3-81-L (12v) Disengageable fixed displacement pump

F3-81-L (12v) Disengageable fixed displacement pump
F3-81-L (12v) Disengageable fixed displacement pump
F3-81-L (12v) Disengageable fixed displacement pump
F3-81-L (12v) Disengageable fixed displacement pump
F3-81-L (12v) Disengageable fixed displacement pump
F3-81-L (12v) Disengageable fixed displacement pump

Part number: 3720383

The new, disengageable F3 hydraulic truck pump series form Parker is a global innovation in mobile hydraulics, by enabling engaging and disengaging of the pump from the diesel engine on the fly. This new solution can save substantial amounts of fuel and reduces wear and tear on the pump and minimize the risk of costly downtime and standstills. At the same time it reduces noise levels and meets industry noise emissions. All that is required is to press a button on the dashboard, without turning off the engine. The F3 hydraulic pump is a very efficient and straight forward pump design with unsurpassed reliability. Its small envelope size gives a simple and inexpensive installation.

More information on our supplier page:

https://ph.parker.com/hu/en/axial-piston-fixed-pumps-series-f3

Series:
Direction:
Electrical control voltage (v):
Max.flow [l/min]:
Max.pressure [BAR]:
Speed rpm (min/max):
Torque:
To Favourites
Recommend
Print
Comparison
Question about the product
Details
Info
Details

Save on fuel!

For the average truck running 100,000 kilometres a year savings can amount to between 200 and 300 litres (45–65 gallons) less diesel, with a corresponding reduction in emissions of greenhouse gases and particulates, all due to the F3 pump being completely disconnectable when not in use. This is a unique, patented characteristic now being launched by Parker.

Enhanced reliabaility!

When a pump is fitted to an engine PTO, even small mishaps like a ruptured hose can result in having to be recovered and towed to a workshop, with all its downsides by way of major outlay and high downtime costs. With the new F3 pump, you just disconnect the pump and make your way home under your own steam!

Cuts noise levels!

Compared to a conventional hydraulic pump in the unloaded position, the new F3 pump generates considerably lower noise levels in disconnected mode – this makes matching future noise emissions regulations easier.

Rigorous product testing and continuous product development help to ensure our hydraulic pumps operate at optimum efficiency and can perform in the most demanding environments.

 

Frame size 81 101
Displacement [cm3/rev] 81,6 102,9
Max flow [l/min]
at 350 bar 163 185
at 400 bar 143 160
Max operating pressure [bar]
continuous 350 350
intermittent 400 400
Max Shaft speed [rpm]
short circuited pump (low pressure) 2300 2300
max speed at 350 bar 2000 1800
at 400 bar 1750 1550
Torque [Nm]
at 350 bar 453 572
at 400 bar 518 653
Max input power [kW]
continuous 76 85
intermittent 95 123
Weight [kg] 16,7 16,7
Info
Body material
Aluminium
Hydraulic circle type
Open
Configuration
Single
Energy recovery ability
No
Includes filter
No
Liquid type
Standard hydraulic liquid
Maximum liquid temperature
120 °C 248 °F
Minimum liquid temperature
-40 °C -40 °F
Maximum kinematic viscosity
1866 SUS
Minimum kinematics viscosity
47 SUS
Capture option
ISO - DIN
Join stump
ISO - BSPP
Connector location
Rear ports
Pump type
Piston Fixed
Axis type
ISO - DIN
Thru-drive capability
No
Weight
16.7 kg/pcs